- 9 -
5. Speaker output terminal
The speakers are connected to this terminal in accordance with the mode of operation.
6. Terminal for power supply connection
Terminal for connection of the power supply (+12V DC, GND) and the remote-turn-on
cable (REM).
7. Integrated fuse
Protects the Amplifier and the electrical system if there is a fault. A blown fuse or fuses
indicates a problem that should be corrected before the fuse is replaced! Always
replace the fuse with a fuse of the same value of fuse. Never substitute a larger value
fuse.
Never bridge fuses or exchange for types with higher rating!
To Next Page
Loading...
Need help?
General
