E29
PA-1960
PA-1480
Base_DE_001-176.qxd 28.01.2014 14:42 Uhr Seite 29
AMPLIFIERS
PA Technology 2014
100 V Power Amplifiers
Order No. 17.2550
High-power mono PA amplifier
• 1 x 960 W
RMS
•Additional, adjustable priority input with
switchable priority function
• 100 V slave input for inserting the amplifier
into a 100 V speaker line
• Switchable 400 Hz high-pass filter
6 dB/oct.
•2insertion facilitiesatthe rear panel for
optionalmodules with the following
features:
- PA-6FD: fault detection module
- PA-6FM: faultmonitoring module
•Connection for external on/off switch
(remote start)
• Temperature-controlled fan, continuously
adjustable
•LEDdisplay for fault, protect, clip, signal,
priority
• Mains operation or 24 V emergency
power operation
Model PA-1960
Output power 1x960W
RMS
Input sensitivity0.775V/60kΩ,bal.
Output impedance 75 V/5.6 Ω, 85 V/7.2 Ω, 100 V/10 Ω
Frequency range 35-20,000 Hz
S/N ratio >100 dB, A-weighted
THD <0.4 %
High-pass filter 400 Hz, 6 dB/oct.
Admiss. ambient temp. 0-40°C
Power supply 230 V~/50Hz/2,600 VA,
24 V‡/80A
Dimensions 483x133x374 mm, 3 RS
Weight 25 kg
Connections
Signal input screw terminals
Speaker output screw terminals
Other features
Order No. 17.1110
Mono PA power amplifier
• 1 x 480 W
RMS
• Switchable 400 Hz high-pass filter 6 dB/oct.
• Temperature-controlled fan, continuously adjustable
•LED display for clip, protect, overtemperature and output level
• Feed-through output (link)
• Mains operation or 24 V emergency power operation
Model PA-1480
Output power 1x480W
RMS
Input sensitivity1.2V, bal.
Output impedance 62 V/8 Ω, 70 V/10 Ω,100 V/21 Ω
Frequency range 35-20,000 Hz, -3 dB
S/N ratio >100 dB, A-weighted
THD <1%
High-pass filter 400 Hz, 6 dB/oct.
Admiss. ambient temp. 0-40°C
Power supply 230 V~/50Hz/1,400 VA,
24 V‡/40A
Dimensions 483x88x374 mm, 2 RS
Weight 17.5 kg
Connections
Signal input XLR / screw terminals
Speaker output screw terminals
Other features
GB_001-117.qxd 29.01.2014 12:56 Uhr Seite 29
To Next Page
Need help?
General
