Need help?Do you have a question about the Monacor PA-4120 and is the answer not in the manual?
General| Power Output | 120 W |
|---|---|
| Input sensitivity (mic) | 1.5 mV |
| Power supply | 230 V AC, 50 Hz |
| Impedance | 4-16 Ohms |
| Inputs | Mic, Line |
| Outputs | Speaker, Line |
| Total Harmonic Distortion | <1% |
| Signal-to-Noise Ratio | Mic: > 60 dB, Line: > 70 dB |
| Input Impedance | 10 kOhm (line) |
| Frequency Response | 20Hz - 20kHz (±1dB) |
Details the controls, indicators, and openings on the amplifier's front.
Describes the various connections and switches found on the amplifier's rear.
Provides instructions for installing the amplifier within a standard 19-inch rack.
Guide to connecting PA and 4-ohm speakers, including type-specific details.
Explains how to connect audio sources using XLR and screw terminal inputs.
Instructions for enabling and using the amplifier's remote switching function.
Details on connecting the main AC power and an optional 24V emergency power source.
To Next Page
