Montarbo TANK 121-a User Manual

2-way, bi-amplifed, active loudspeaker systems
Specifications
TANK101A TANK121A
Enclusure vented 2-way; biamped vented 2-way; biamped
• Components custom designed custom designed
- bass 10” shielded neodymium magnet woofer (2.5“ voice coil) 12” shielded neodymium magnet woofer (2.5“ voice coil)
- mid/high 1” shielded compression driver (1" voice coil) 1” shielded compression driver (1" voice coil)
loaded by a 80° x 60° horn loaded by a 80° x 60° horn
• Frequency response 65 Hz ÷ 20 kHz ± 2dB 50 Hz ÷ 20 kHz ± 2dB
bass: 65 Hz ÷ 2 kHz; mid/high: 2 kHz ÷ 20 kHz bass: 50 Hz ÷ 2 kHz; mid/high: 2 kHz ÷ 20 kHz
• Active electronic x-over 2000 Hz / 24 dB/oct 2000 Hz / 24 dB/oct
• Sensitivity 98 dB SPL @ 1W/1m on axis 100 dB SPL @ 1W/1m on axis
• Max. SPL 123 dB 125 dB
Built-in amplifiers 2 MosFet, class AB, dedicated power units; 2 MosFet, class AB, dedicated power units;
2 independent dynamic processors; 2 independent dynamic processors;
‘soft start’ circuit; self-diagnostic. ‘soft start’ circuit; self-diagnostic.
• Max. output power 330 W EIAJ 330 W EIAJ
- bass 300 W (4 Ohms / 0,1% THD) 300 W (4 Ohms / 0,1% THD)
- mid/high 30 W (8 Ohms / 0,1% THD) 30 W (8 Ohms / 0,1% THD)
• Input sensitivity micro: -20dBu; line: 0 dBu micro: -20dBu; line: 0 dBu
• Noise referred to input - 108 dB (A weighted) - 108 dB (A weighted)
• Input impedance micro: 2 kohm; line: 22 kohm micro: 2 kohm; line: 22 kohm
Connections balanced input (Neutrik Combo
®
) balanced input (Neutrik Combo
®
)
balanced LINK output (XLR) balanced LINK output (XLR)
Construction 15 mm birch multiply; anti-scratch paint 15 mm birch multiply; anti-scratch paint
steel protection grille steel protection grille
Fittings speaker stand adaptor; carrying handle speaker stand adaptor; carrying handle
Dimensions / Weight W 46.4 x H 32.5 x D 32.5 cm / 16 kg W 51.2 x H 36 x D 43.5 cm / 19 kg
APPENDIX
24

Montarbo TANK 121-a Specifications

General

Brand	Montarbo
Model	TANK 121-a
Category	Speakers
Language	English