EasyManuals Logo
Home>Motorola solutions>Two-Way Radio>Curve Series

Motorola solutions Curve Series Quick Reference Guide

Motorola solutions Curve Series
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Reference Guide Curve Series Two-Way Radio
Audio
Accessory
Connector
Charging
Rail
Power
Button
Top Button
Volume/Up-Down
Control Buttons
Channel/Menu
Button
Antenna
Tx/Rx
Indicator LED
PTT
(Push-To-Talk)
Button
Microphone
Speaker
*VAB (Voice
Assistant Button)
*Voice Assistant button enables you to initiate connection through WiFi.
Hold the VA button to log in or out, send a voice message, or trigger a
call. Subscription is required for Wi-Fi capabilities.
Congratulations on Your New Digital Radio!
Ensure your battery is fully charged before first use. The Curve
series operates in the license-free 900MHz ISM Band (915-928MHz).
For more information on product details, user guide, brochures, and
accessories, refer to http://www.motorolasolutions.com/curve or please
call: 1-800-931-855 (Australia) or 0-800-445-227 (New Zealand).
Important: Before using this product, read the RF Energy
Awareness and Acoustic Safety information and operating
instructions contained in the Safety and RF Energy Exposure
Booklet enclosed with your radio package.
Getting Started
For more information, refer to the User Guide in
https://www.motorolasolutions.com/en_xa/products.html
Installing the Battery
1. Slide the battery latch to unlock position and lift up the battery door.
2. Align the battery contacts with the tabs in the battery compartment.
Insert and fit the battery until it locks in place.
3. Put the battery door back on the radio. Slide the latch to the lock
position.
Battery Latch
Lateral
Battery Slot
Holster
Tray
Rail
Drop in Tray Charger
with Power Supply
Charging a Radio and Battery using a Multi
Unit Charger - MUC (Optional Accessory)
Charging the Battery
1. Connect the power supply to the drop-in charger tray or a power cord
to the multi-unit charger (MUC).
2. Insert the radio into the tray. Ensure that the lateral battery slots are
inserted in the tray rails.
3. The charger LED flashes a few times to indicate the current battery
charge when the radio is inserted into the charger.
4. Short press the Power button to check the battery status on the
device.
English
1
Tray
Rail
Tray

Other manuals for Motorola solutions Curve Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola solutions Curve Series and is the answer not in the manual?

Motorola solutions Curve Series Specifications

General IconGeneral
BrandMotorola solutions
ModelCurve Series
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals