15Using the phone
3. Using the phone
NOTE
The handset will automatically time the duration of all external calls. The call timer will
display after the rst 10 seconds of the call. When the call ends, the total duration of the
talk time stays on the display for 3 seconds.
3.1 Switch the handset on / o
Press and hold
n
to switch the handset on or o.
3.2 Calls
3.2.1 Make a call
1. Press
T
.
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
p to delete the last digit.
2. Press
T
to dial.
3.2.3 End a call
Press
n
, or place the handset back on the base or charger.
3.2.4 Receive a call
When you receive an external call, the phone rings and
icon flashes on the display.
1. Press
T
to answer the call.
NOTE
To answer calls by simply lifting the handset from the base, switch Auto answer on.
3.3 Adjust the earpiece volume
During a call, press u or
d
to increase or decrease the volume. There are 5 levels to
choose from.
3.4 Mute
You can mute your handset so that you can talk to someone nearby without your caller
hearing.
1. During a call, press
M. The display shows
MUTE ON
and your caller cannot hear
you.
2. Press
M again to resume your call.
3.5 Intercom
3.5.1 Make an internal call
If you have more than one handset registered to the base, you can make internal calls
between two handsets.
The
icon flashes and the handset number that is being called is displayed.
To Next Page
Loading...
Need help?
General
