25
Base settings
6.5 Recall mode
Depending on your country and network operator, your C6 has the recall time
set as 100 ms (
RECALL 1
). It is unlikely that you need to change this setting unless
advised to do so.
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
RECALL
and press m.
3. Press
u or d to select
RECALL 1
(short flash time) or
RECALL 2
(long flash time)
and press
m to confirm.
6.6 Restore default settings
You can restore your C6 to its default (original) settings.
All the handsets that are registered to the base will be retained.
Important
Resetting your phone to its default settings will delete all entries in the Phonebook
and Calls list. All handset and base settings will also be reset.
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
DEFAULT
and press m.
3. Enter the 4 digit PIN code (default = 0000) and press
m. The display shows
CONFIRM ?
.
4. Press
m to confirm or n to return to the previous menu. Your C6 will restart
automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your C6 to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
* while replacing the batteries. The display shows
DEFAULT.
3. Press m to confirm. Your C6 will restart automatically.
6.8 Eco mode
Your C6 oers ECO mode function which reduces the transmitted power and
energy consumption when switched on. This feature is set to OFF by default.
To switch Eco mode on:
1. Press
m, scroll d to
SETUP
and press m.
2. Scroll
d to
ECO MODE
and press m.
3. Press
u or d to select
ON
or
OFF
and press m to confirm.
To Next Page
Loading...
Need help?
General
