8
English
2. Plug the transformer into the appropriate ac outlet.
The charger LED will blink green once to indicate
a successful power-up.
3. Insert a battery, or a radio with battery (radio
turned off), into the charger's pocket by:
a. aligning the groove on each side of the battery
with the corresponding raised rail on each side
of the charger pocket.
b. pressing the battery toward the rear of the
pocket
c. sliding the battery into the charger pocket,
ensuring complete contact between the char-
ger and battery contacts
6881088C11_na.book Page 8 Thursday, April 7, 2016 1:39 PM
To Next Page
Loading...
Need help?
General
