9Getting started
Note that new batteries do not reach their full capacity until they have been put to normal
use for several days.
To keep your batteries in the best condition, leave the handset o the base for a few hours
at a time.
Running the batteries right down at least once a week will help them last as long as
possible.
The charge capacity of the rechargeable battery will reduce with time as it wears out,
giving the handset less talk / standby time. Eventually it will need to be replaced, please
contact customer service helpline found in this user guide.
After charging your handset for the rst time, subsequent charging time is about 6–8 hours
a day. Batteries and the handset may become warm during charging. This is normal.
1
All talk and standby times are approximate and depend on features selected and usage
pattern.
Date and time
If you have subscribed to a Caller ID Service and Auto Clock is set to on (see page 26),
the date and time is set automatically for all handsets when you receive your rst call. If
Auto Clock is set to o the time and date does not set automatically.
If you do not have a Caller ID service, you can set the date and time manually.
1. Press
M, scroll d to
Clock/Alarm
and press M.
2.
Date & Time
is displayed. Press M.
3. Enter the date using the format DD-MM-YY e.g. 04/08/15 for 4 August 2015 and press
M.
4. Enter the time using the 24 hour format
HH:MM
, e.g. 14:45 for 02.45pm and press M.
5. Press
e to return to standby.
Your IT.6X is now ready for use.
To Next Page
Loading...
Need help?
General
