10 Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the micro-USB plug of the power adapter to the Baby Unit
(camera) and the other end to a suitable mains power socket.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2. Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in Green.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit
off.
IMPORTANT
The Baby Unit is able to operate without mains power for up to 3 hours with the
support of a built-in rechargeable battery (Ni-MH battery 2.4V, 900mAh).
Please charge the unit at least 16 hours before first time use.
The battery is not a user-accessible item. Please contact the Helpline if you think
it needs replacing..
To Next Page
Loading...
Need help?
General
