Introduction Installation Troubleshooting Glossary License
SBV5121 VoIP Cable Modem User Guide 17
7
On the Insert Disk window, click OK. The Files Needed window is displayed:
8 If necessary, select your CD-ROM drive in the “Copy files from” list.
9 Click Browse.
10 Double-click the NetMotCM.sys file in the CD-ROM root directory. The Files Needed window is displayed:
11 Click OK. The Found New Hardware Wizard window is displayed:
12 Click Finish to complete the installation.
When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 2000” on
page 23.
If you have any difficulties setting up the USB driver, perform “Removing the USB Driver from Windows 2000” on
page 38 and repeat this procedure.
To Next Page
Loading...
Need help?
General