20
GETTING STARTED
1. Channel: Current channel that the radio is
using, depending upon radio model.
2. Frequency: The frequency the radio uses to
transmit/receive.
3. Interference Eliminator Code: These codes
help minimize interference by providing a
choice of code combinations.
For details of how to set up frequencies and
CTCSS/DPL codes in the channels, refer to
“Programmable Features” on page 24
Note: Interference Eliminator Codes are also
referred as CTCSS/DPL codes or PL/DPL
codes.
To Next Page
Loading...
Need help?
General
