23
GETTING STARTED
environments. VOX / iVOX sensitivity can be
programmed via the CPS.
Default value is OFF (Level 0). If you want to
use the VOX feature, VOX level should be set
at a different level from 0.
• 1 = Low sensitivity
• 5 = Medium sensitivity
• 9 = High sensitivity
Reset to Factory Defaults
Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
To Next Page
Loading...
Need help?
General
