CSD Series Variable Frequency AC Drive
MOTORTRONICS
- 65 -
Í
H1
Í
H
W
Î
Î
W1
D
Ð
Ï
Î
Î
Î
Î
Filtering - The use of filters in suppressing EMI and RFI is aimed at preventing
interference passing down power lines and changing impedance conditions
so EMI on the ground system is redirected back to its source. A filter on the
input side can use capacitors and chokes and has significant benefits in
reducing EMI. Filters on the output must consist only of a low value choke.
Positioning and installation of these devices is critical and manufacturer's
guidelines should be strictly followed.
Figure 9-2
EMI/RFI Filtering
Figure 9-3
CE Filter Dimensions
Table 9 B -CE Filter Selection Chart
HWD H1 W1
CSD-2P5
CSD-201
10-CSD-201 7.8 4.49 1.18 7.2 3.78
CSD-202
10-CSD-202 9.3 6.3 1.8 8.2 5.5
CSD-203 10-CSD-203 10.4 7.7 2 9.7 6.9
CSD-401
CSD-402
10-CSD-402 9.1 6.2 1.6 8.4 5.4
CSD-403
CSD-405
10-CSD-405 10.3 7.6 1.6 9.5 6.9
CSD-205
10-16CE4 9.1 5.9 2.6 4.5 5.3
CSD-207 10-25 CE4 9.9 5.9 2.6 4.5 5.3
CSD-210
10-36CE4 9.9 5.9 2.6 4.5 5.3
CSD-215 10-50CE4 9.9 5.9 2.6 4.5 5.3
CSD-220
10-80CE4 16.8 6.7 3.5 14.8 5.1
CSD-230 10-110CE4 17.2 6.7 3.5 14.8 5.1
CSD-407
CSD-410
10-16CE5 9.1 5.9 2.6 4.5 5.3
CSD-415
10-25CE5 9.9 5.9 2.6 4.5 5.3
CSD-420 10-36CE5 9.9 5.9 2.6 4.5 5.3
CSD-430 10-50CE5 9.9 5.9 2.6 4.5 5.3
Model
Number
Filter Model
CE Filter Dimensions
Mounting HolesDimensions
To Next Page
Loading...
Need help?
General
