CSD Series Variable Frequency AC Drive
MOTORTRONICS
- 66 -
Grounding - It is very important that effective EMI and RFI grounding be
provided. EMI and RFI grounding provide a low HF impedance to earth.
This differs from standard safety grounding that presents a relatively high
impedance to ground due to skin effect. Follow HF grounding procedures
when making ground connections in these applications.
Screening - The cable from the inverter to the motor should be screened
and solidly connected to both the inverter and motor using as much contact
area as possible. Mounting the inverter into an grounded metal enclosure
will also limit RFI. Guidelines for the positioning of filters, screening and
grounding are shown on the diagram.
9.3 AC Drive Model Number Definitions
Table 9 C - AC Drive Model Definitions
9.4 Extension Keypad Remote Cable
There are two (2) keypad sizes for the CSD series inverters. Please see
Table 9 D for the appropriate extension keypad remote cable and then refer
to the corresponding assembly diagram.
Table 9 D - Compatible Keypads and Cables
Model number Fn-00
CSD-2P5
01
CSD-201
02
CSD-202
03
CSD-203
04
CSD-505
05
CSD-207
06
CSD-210
07
CSD-215
08
CSD-220
09
CSD-230
30
CSD-401
10
CSD402
11
CSD403
12
CSD-405 13
CSD-407 14
CSD-410 15
CSD-415 16
CSD420 17
CSD-430 18
Model
Matched
Remote Cable
Keypad
CSD-2P5 - CSD-205
CSD-401- CSD-405
CSD-207 - CSD-230
CSD-407 - CSD-430
CSD W300X * NDOP-01
CSD W300XA * NDOP-02
To Next Page
Loading...
Need help?
General
