6
1. DESCRIPTION
2. USING THE APPLIANCE
1 Motor unit
2 Lid
3 Upper blades
4 Lower blades
5 Bowl
6 Fixed shaft
• Before first use, wash the bowl, the blades and the lid of the bowl with luke warm water.
ATTENTION: DO NOT IMMERSE THE MOTOR UNIT OR PUT IT UNDER WATER. Clean with a damp
cloth, dry it carefully.
• Put the upper blade onto the lower blade and bring it to its locked position by turning
counterclockwise (Fig.1).
• Fit the upper and lower blades onto the fixed shaft in the bowl (Fig.2).
• Pour in the ingredients and lock the lid (Fig.3).
• Place the motor unit onto the assembly by turning it slightly.
• Plug in the appliance and press the start button, at the same time holding the appliance by
the motor unit.
• At the end of preparation, release the button, unplug the appliance and wait until the blades
come to a complete stop.
• Remove the motor unit, the lid and the blades to pour out the preparation. You can separate
the upper blade from the lower blade by turning it clockwise and pulling it up.
Notes:
For liquids, never exceed 0.4 l.
CAUTION: the safety precautions LS-123456 are
part of the appliance. Read them carefully before
using your new appliance for the first time. Keep
them in a place where you can find and refer to
them later on.
To Next Page
Loading...
Need help?
General
