MrCool RG10F2/BGEFU1 User Manual

Page 7 mrcool.com
How To Use Basic Functions
DRY Mode (dehumidifying function)
In DRY mode, the unit acts as a dehumidifier.
To select DRY mode follow these steps:
1. Press the MODE button and select DRY mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the ON/OFF button to start the unit.
NOTE: FAN speed cannot be set or adjusted
in DRY mode.
HEAT Mode
To select HEAT mode follow these steps:
1. Press the MODE button and select HEAT
mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the FAN button to select the desired
fan speed: AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
NOTE: As the outdoor temperature drops,
the performance of the unit’s HEAT function
may be affected. If this occurs, we
recommend using other heating appliances
in conjunction with the unit.
FAN Mode
1. Press the MODE button and select FAN
mode.
2. Press FAN button to select the desired the fan
speed: AUTO, LOW, MED, or HIGH.
3. Press the ON/OFF button to start the unit.
NOTE: The temperature cannot be set or
adjusted in FAN mode. As a result of this, the
remote control LCD display will not display
the temperature.
1
3
2
1
2
3
1
3
2
4

MrCool RG10F2/BGEFU1 Specifications

General

Brand	MrCool
Model	RG10F2/BGEFU1
Category	Remote Control
Language	English