MrCool RG10F2/BGEFU1 User Manual

How to Use Basic Functions
Page 6mrcool.com
How to Use Basic Functions
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operating mode based
on the set temperature. To select AUTO mode
follow these steps:
1. Press the MODE button and select AUTO
mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the ON/OFF button to start the unit.
NOTE: FAN speed cannot be set or adjusted
in AUTO mode.
COOL Mode
SETTING TEMPERATURE
The operating temperature range for units is
60-86°F (16-30°C) or 68-82°F (20-28°C)
(model dependent). You can increase or
decrease the set temperature in 1°F (1°C)
increments by using the the Temperature
or buttons on the remote.
ATTENTION
Please ensure the unit has power before operation is attempted.
To select COOL Mode follow these steps:
1. Press the MODE button and select COOL
mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the FAN button to select the desired fan
speed: AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
1
3
2
1
3
2
4

MrCool RG10F2/BGEFU1 Specifications

General

Brand	MrCool
Model	RG10F2/BGEFU1
Category	Remote Control
Language	English