3-18
MS-7210 Micro-ATX Mainboard
Resume By PS/2 Mouse
This setting only works Resume By PS/2 KB is set to [Hot Key]. This setting
determines whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse is detected. Setting options: [Disabled],
[Enabled].
Resume By LAN
This setting determines whether the system will be awakened from what power
saving modes when input signal of the LAN device is detected. Setting options:
[Disabled], [Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled].
To Next Page
Loading...
Need help?
General
