3-19
BIOS Setup
PNP/PCI Configurations
This section describes configuring the PCI bus system and PnP (Plug & Play)
feature. PCI, or Peripheral Component Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself uses when communi-
cating with its special components. This section covers some very technical items
and it is strongly recommended that only experienced users should make any changes
to the default settings.
Primary Graphics Adapter
This setting specifies which VGA card is your primary graphics adapter. Setting
options:
[PEG/PCI] The system initializes the installed PCI Express graphics card first. If
an PCI Express graphics card is not available, it will initialize the PCI
VGA card.
[PEG/IGD] The system initializes the installed PCI Express graphics card first. If
an PCI Express graphics card is not available, it will initialize the
onboard VGA port.
[PCI/PEG] The system initializes the installed PCI VGA card first. If a PCI VGA
card is not available, it will initialize the PCI Express graphics card.
[PCI/IGD] The system initializes the installed PCI VGA card first. If a PCI VGA
card is not available, it will initialize the onboard VGA port.
[IGD] Only onboard VGA port availabled.
To Next Page
Loading...
Need help?
General
