3-2 3-3
How to Manage Power Supply
This section provides users basic safety precautions to take when using an PD adapter
and battery power properly.
PD Adapter
Ensure that the handheld device is connected to an AC power source via the PD adapter
before turning it on for the first time. If the device automatically shuts down due to low
battery power, it is likely to cause system failure. Below are some Dos and Don'ts of an PD
adapter.
▶ Dos
• Use the adapter that shipped with MSI Claw only.
• Always be aware of heat coming from the in use PD adapter.
• Unplug the AC power cord before disassembly the device.
▶ Don'ts
• Cover an in-use adapter since it can generate heat.
• Have the AC power cord plugged after powering off the system when the device
is going to be left unused for a longer time.
Battery
When you get a new handheld device or a new battery for the device, it is important to
know how to charge and care for the battery in order to get the most out it for as long as
you can.
Be aware of that the battery may not be replaced by users.
▶
Safety guidelines
• This device is equipped with a non-removable battery, follow the local regulations
while discarding the device.
• Always keep the device and its battery away from excessive moisture and
extreme temperatures.
• Always unplug the AC power cord before installing any module to the device.
To Next Page
Loading...
Need help?
General
