EasyManuals Logo
Home>MSI>Monitor>MAG401QR

MSI MAG401QR User Manual

MSI MAG401QR
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
Always disconnect the power cord or switch the wall socket off if the device would
be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved
for use with this device.
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface.
To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.
To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
Do not leave the device in an unconditioned environment with a storage temperature
above 60℃ or below -20℃, which may damage the device.
The maximum operating temperature is around 40℃.
When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
Always keep strong magnetic or electrical objects away from the device.
25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI MAG401QR and is the answer not in the manual?

MSI MAG401QR Specifications

General IconGeneral
Color gamut94 %
Pixel pitch0.2697 x 0.2697 mm
Aspect ratio21:9
Screen shapeFlat
Display diagonal40 \
Anti-glare screenYes
Display technology-
Vertical scan range60 - 144 Hz
Maximum refresh rate155 Hz
Response time (fast)1 ms
Horizontal scan range30 - 160 kHz
Supported video modes1440p
Screen curvature rating1500R
Viewable size, vertical387.72 mm
sRGB coverage (typical)118 %
Contrast ratio (dynamic)100000000:1
Contrast ratio (typical)1000:1
Display number of colors1.07 billion colors
Display brightness (peak)250 cd/m²
Viewable size, horizontal926.22 mm
Supported graphics resolutions3440 x 1440
High Dynamic Range (HDR) technologyHigh Dynamic Range (HDR) 400
USB hub version2.0
Headphone outputs1
DisplayPort version1.4a
USB upstream port typeUSB Type-A, USB Type-B, USB Type-C
AC input voltage100 - 240 V
Power supply typeExternal
AC input frequency50/60 Hz
Power consumption (standby)- W
Package typeBox
Package weight12400 g
Tilt angle range-5 - 20 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
Product colorBlack
Market positioningGaming
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)530.29 mm
Width (with stand)945.22 mm
Height (with stand)289.63 mm
Weight (with stand)10300 g
Depth (without stand)416.12 mm
Height (without stand)83.32 mm
Weight (without stand)8000 g

Related product manuals