MEGA ePower 1000HD
2
2.2 Packing List
MEGA ePower 1000HD device (1 device for single pack, 2 devices for duo
pack, 3 devices for network duo pack)
C D ROM x 1
RJ45 Ethernet cable (1 cable for single pack, 2 cables for duo pack, 3 cables
for network duo pack)
2.3 Safety Precautions
The device is intended for connection to the AC power line. Before using the device,
read the precautions carefully, in order to use the device correctly and safely. For
installation instructions, refer to the description of installation in the user manual.
Follow all the warnings and instructions marked on the product.
Before cleaning the device, unplug it from the outlet on the wall. Use dry
cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.
Do not place the device near water.
Do not place the device near or over a radiator or heat source.
Do not use an extension cord between the device and the AC power supply.
Only professional technicians should service the device. Opening or
removing covers may result in exposure to dangerous voltage points or other
risks.
Unplug the device from the wall outlet and refer to professional service
personnel for the following conditions:
– If liquid is spilled into the product
– If the device is exposed to rain or water
– If the device does not operate normally when the operation instructions
are followed.
– If the device exhibits a distinct change in performance.
The product can plug only in vertical, not in horizontal.
To Next Page
Loading...
Need help?
General
