EasyManuals Logo
Home>MSI>Monitor>Modern MD272P

MSI Modern MD272P User Manual

MSI Modern MD272P
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
3
⚠
Important
∙
Remove the screws on the monitor groove if needed before installing the stand.
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙
Do not use any sharp objects on the panel.
∙
The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
∙
This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI Modern MD272P and is the answer not in the manual?

MSI Modern MD272P Specifications

General IconGeneral
Color depth8 bit
Pixel pitch0.3114 x 0.3114 mm
Aspect ratio16:9
Screen shapeFlat
Display diagonal27 \
Anti-glare screenYes
Display technologyLCD
Maximum refresh rate75 Hz
Viewable size, vertical336.312 mm
sRGB coverage (typical)100 %
Contrast ratio (dynamic)100000000:1
Contrast ratio (typical)1000:1
Display number of colors16.7 million colors
Viewable size, horizontal597.888 mm
Digital vertical frequency8 - 75 Hz
Digital horizontal frequency30 - 112 kHz
Display brightness (typical)250 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
Input current5.79 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
AC adapter output voltage19 V
Power consumption (standby)- W
Package typeBox
Package depth464 mm
Package width893 mm
Package height167 mm
Package weight8100 g
Pivot angle-90 - 90 °
Tilt angle range-5 - 20 °
Height adjustment110 mm
Cable lock slot typeKensington
Panel mounting interface75 x 75 mm
Product colorBlack
Market positioningBusiness
CompatibilityPC, Mac, PS5™, PS4™, Xbox, Mobile, Notebook
RMS rated power2 W
Number of speakers2
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)200.81 mm
Width (with stand)613.5 mm
Height (with stand)401.5 mm
Weight (with stand)58005850 g

Related product manuals