Packing Contents
* These pictures are for reference only and may vary without notice.
* The packing contents may vary according to the model you purchased.
* If you need to purchase the optional accessories or request part numbers, please visit the MSI
website at http://www.msi.com/index.php or consult the dealer.
Optional Accessories
User Guide
Drivers & Utilities
Disc
Antenna x 2
SATA Cable x 2
System Fan
M2 Screw x 4
M3 Screw x 8
#6-32 Sunk Screw
x 1
T5 Screw x 4
Nightblade
CPU Cooler
#6-32 Flat Screw
x 4
Fan Power Cable
Slim ODD Cable
Important
These diagrams here are for reference only and may vary from the product you purchased. The
CPU, CPU cooler, system fan, memory module, graphics card, and storage device showed in the
installation drawing are optional.
Assembly Precautions
■ The components included in this package are prone to damage from electrostatic discharge
(ESD). Please adhere to the following instructions to ensure successful computer assembly.
■ Always turn o the power supply and unplug the power cord from the power outlet before
installing or removing any computer component.
■ Ensure that all components are securely connected. Loose connections may cause the computer
to not recognize a component or fail to start.
■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the
motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge
yourself of static electricity by touching another metal object before handling the motherboard.
■ Before turning on the computer, ensure that there are no loose screws or metal components on
the motherboard or anywhere within the computer case.
■ Do not use the computer in a high-temperature environment.
■ Do not boot the computer before installation is completed. This could cause permanent damage
to the components as well as injury to the user.
■ If you need help during any installation step, please consult a certied computer technician.
Pliers, can be used as an auxiliary
tool to connect some connectors or
cables.
A Phillips (crosshead) screwdriver
and a athead screwdriver, can be
used to do most of the installation.
Choose one with a magnetic head
would be better.
Rubber gloves, can prevent
yourself from being incised and
suering the static charge.
Forceps, can be used to pick up
tiny screws or set up the jumpers.
Assembly Tools You Need
Important
These screws can be replaced by thumbscrews for easy chassis
open and close.
Cleaning the Dust Container
Important
Regularly cleaning the dust container could keep the system well-ventilated. Clean the dust
container with clean water and dry it before replacing it to the system.
G52-B1062X1
Thumber Screw x 4
2.5” HDD Slide x 2
Opening the Chassis
Handle Sleeve
Network Driver &
Utilities Disc
VGA Sponge
Nightblade X2 Overview
開啟機箱
开启机箱
シャーシの開ける方
케이스 열기
Membuka Casing
Mở thùng máy ra
เปิดฝาตัวเครื่อง
Abrir la torre
Ouverture du chassis
Gehäuse önen
Открытие корпуса
Aprire lo Chassis
Kasayı açma
Otevření skříně
Nyissa ki a házat
Otwieranie obudowy
Abrindo gabinete
Het chassis openen
Otvorenie skrine
Deschiderea carcasei
Otvaranje kućišta
Öppna Chassit
Hvordan chassiset åbnes
Kotelon avaaminen
Åpne kabinettet
Korpuse avamine
Korpusa atvēršana
Atidarymas Važiuoklė
1. USB 3.0 Port (Type C)
2. USB 2.0 Port/ Super Charger USB Port
3. Microphone jack
4. Line-Out jack
5. OC button
6. LED indicator
7. System power button
8. Power jack
9. PS/2 Keyboard/Mouse combo port
10. USB 3.0 port
11. DisplayPort
12. RJ-45 LAN port
13. Antenna connector
14. Center/ Subwoofer Out
15. Rear Speaker Out
16. Optical S/PDIF-Out
17. Line-In/ Side Speaker Out
18. Line-Out/ Front Speaker Out
19. Mic In
20. USB 2.0 port
21. HDMI port
22. USB 3.0 port
23. USB 3.1 Port (Type C)
1 2 3 4 65 7
8
10
9
12
20
13
14
15
16
11
17
18
19
21
22
23
Nightblade X2B Overview
1. USB 3.0 Port (Type C)
2. USB 2.0 Port/ Super Charger USB Port
3. Microphone jack
4. Line-Out jack
5. LED light button
6. LED indicator
7. System power button
8. Power jack
9. PS/2 Keyboard/Mouse combo port
10. USB 3.0 port
11. DisplayPort
12. RJ-45 LAN port
13. Antenna connector
14. Center/ Subwoofer Out
15. Rear Speaker Out
16. Optical S/PDIF-Out
17. Line-In/ Side Speaker Out
18. Line-Out/ Front Speaker Out
19. Mic In
20. USB 2.0 port
21. HDMI port
22. USB 3.0 port
1 2 3 4 65 7
8
10
9
12
20
13
14
15
16
11
17
18
19
21
22
OC Genie Button (Nightblade X2)
OC Genie button can help to gain the better perfomance while playing 3D games.
■
Push the OC Genie button to activate the overclocking mode. The button LED will light.
■
Push the OC Genie button again to deactivate the overclocking mode.
OC Genie OFF OC Genie ON
LED Light Button (Nightblade X2B)
Push the LED light button to turn on or o the LED on the bottom of the chassis.
LED OFF LED ON
BIOS, Driver and Utility Updates
Visit the MSI website for technical guide, BIOS, driver and utility updates, and other information.
http://www.msi.com/service/download/
Keyword: Nightblade X2 / Nightblade X2B
To Next Page
Need help?
General
Weight and Dimensions
