13
OSD Menus
Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ∙ Properly adjust Brightness
according to the surrounding
lighting.
∙ Brightness will be grayed
out when MPRT or HDCR are
enabled.
Contrast 0-100 ∙ Properly adjust Contrast to relax
your eyes.
Sharpness 0-5 ∙ Sharpness improves clarity and
details of images.
Color
Temperature
Cool ∙ Use Up or Down Button to select
and preview mode effects.
∙ Press the Middle Button to
confirm and apply your mode
type.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ∙ Users can adjust Screen Size in
any mode, any resolution and any
screen refresh rate.
4:3
16:9
Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 ∙ Users can adjust Input Source in any mode.
HDMI2
DP
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
•While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
•While “No Signal” message box is shown
on the monitor.
ON
To Next Page
Loading...
Need help?
General