MSI Optix MPG27CQ2 User Manual

Preface
viivi
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU)�

󰘲
European Union�
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules� These limits are
designed to provide reasonable protection against harmful interference in a residential
installation� This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications� However, there is no guarantee that
interference will not occur in a particular installation� If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
󰘯
one or more of the measures listed below:
󰩛 Reorient or relocate the receiving antenna�
󰩛 Increase the separation between the equipment and receiver�
󰩛 󰘯
the receiver is connected�
󰩛 Consult the dealer or an experienced radio/television technician for help�
Notice 1
   󰘰        
compliance could void the user’s authority to operate the equipment�
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits�
This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
1� this device may not cause harmful interference, and
2� this device must accept any interference received, including interference that may
cause undesired operation�

MSI Optix MPG27CQ2 Specifications

General

3D	No
Panel type	VA
Pixel pitch	0.2331 x 0.2331 mm
Display surface	Matt
Display diagonal	27 \
Screen curvature	1800 mm
Display technology	LED
Native aspect ratio	16:9
Horizontal scan range	70.56 - 214.56 kHz
Screen curvature rating	1800R
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	115 %
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	3000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	596.736 mm
Digital vertical frequency	48 - 144 Hz
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	2560 x 1440
On/off switch	Yes
NVIDIA G-SYNC	-
Product color	Black
Market positioning	Gaming
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DisplayPort version	1.2
USB upstream port type	USB Type-B
Number of upstream ports	1
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	2
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Input current	4.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	90 W
Package weight	10600 g

Weight and Dimensions

Depth (with stand)	379.3 mm
Width (with stand)	612 mm
Height (with stand)	555.8 mm
Weight (with stand)	7600 g