EasyManuals Logo
Home>MSI>Monitor>PRO MP272C

MSI PRO MP272C User Manual

MSI PRO MP272C
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Push the stand towards the monitor groove until it locks in place.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
3
Important
Remove the screws on the monitor groove if needed before installing the stand.
Place the monitor on a soft, protected surface to avoid scratching the display panel.
Do not use any sharp objects on the panel.
The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI PRO MP272C and is the answer not in the manual?

MSI PRO MP272C Specifications

General IconGeneral
Panel typeVA
Color depth8 bit
Pixel pitch0.311 x 0.311 mm
Screen shapeFlat
Display diagonal27 \
Anti-glare screenYes
Display technology-
Native aspect ratio16:9
Vertical scan range48 - 75 Hz
Maximum refresh rate75 Hz
Supported video modes1080p
Screen curvature rating1500R
Viewable size, vertical336 mm
sRGB coverage (typical)98 %
Contrast ratio (typical)4000:1
Display number of colors16.7 million colors
Display diagonal (metric)69 cm
Viewable size, horizontal598 mm
Display brightness (typical)250 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
CompatibilityPC, Mac, PS5™, PS4™, Xbox, Mobile, Notebook
AMD FreeSync typeFreeSync
RMS rated power4 W
Number of speakers2
Product colorBlack
Market positioningBusiness
HDMI version1.4b
Tilt angle range-5 - 20 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
Input current4 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
AC adapter output voltage12 V
Power consumption (standby)0.5 W
Power consumption (typical)- W
Package typeBox
Package depth150 mm
Package width858 mm
Package height491 mm
Package weight7030 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)250 mm
Width (with stand)610.5 mm
Height (with stand)462.5 mm
Weight (with stand)5000 g
Depth (without stand)84.3 mm
Height (without stand)362.5 mm
Weight (without stand)3320 g

Related product manuals