15
CONTROLLER OPERATION
Temperature display: press RESET on PRCD, the screen shows current temperature
Heater Button: Press HEATER button to turn the function on/off.
Meanwhile, the filter will automatically run and test for 15s. If there is no abnormality, the heating
starts until the temperature reaches setting value. After the current water temperature drops
below the setting temperature, the heating system will restart automatically. When the HEATER
button is red, the heating system is activated. When the HEATER button is green, the heating
system is at rest as the water is at the set temperature.
Filter Button: Press FILTER button to turn the function on/off. The light of FILTER button
display green when activated.
NOTE: Filtration cannot be turned off when Heating is activated. When the Heating function is
turned off, Filtration will be stopped after 30 seconds. Filtration function can be then activated
separately.
NOTE: Auto-filtration system every 4 hours.
Bubble Button: To activate the bubbling massage function, which has a 20-minutes auto off
for 10-mintues feature. The light of Bubble button displays green when activated.
UP DOWN
HEATER
BUBBLE
FILTER
TIMER
°C
Heater Button
Bubble Button
Up Button
Filter Button
Timer Button
Down Button
FILTER
HEATER
BUBBLE
To Next Page
Loading...
Need help?
General
