Name: Multiplex Royal SX 9
Brand: Multiplex
Rating: 4 (1 reviews)

To Next Page

MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • Bretten • Germany

www.multiplex-rc.de

Instructions

Contents3
- Table of Contents3
Introduction7
The ROYAL SX Philosophy8
Arrangement of the Instructions8
Safety Notes9
General Safety Notes10
Range Checking11
Liability / Compensation12
Guarantee12
CE Conformity Declaration12
Specification13
The Transmitter Battery13
Safety Notes13
Charging the Transmitter Battery13
The Correct Method of Charging14
- Fast Charging15
- Normal Charging15
ROYAL SX Battery Management14
- Self-Discharge14
Terms Used in Battery Charging15
- This Is Important15
- Unchanged Features15
Replacing the Transmitter Battery16
- Trickle Charging16
8.7. Transmitter Battery Care and Storage16
Recycling16
The Transmitter17
Front Face of the Transmitter17
Rear Face of the Transmitter18
Interior of the Transmitter18
Mechanical Details19
- Opening / Closing the Transmitter Case19
- Removing / Installing the RF Module19
- Ideal Transmitter20
- Replacing the Transmitter Battery20
- Adjusting / Replacing the Stick Tops21
- Adjusting the "Hardness" of the Sticks21
- Ratchet / Friction System21
- Swivelling the Stick Units21
Plastic Stick Top with Three Buttons22
- Advantages of Digital Trims23
- On-Screen Trim Display23
- The Cruciform Digital Trims23
- RF Module Excl. Scanner Installed24
- Switching on "Normally24
Installation and Functions22
Digital Trims22
- General Information22
10.2. Switching on “Normally”24
Switching On, Using the Transmitter24
Switching on for the First Time24
Switching the Transmitter on with Throttle-Check Active24
- Throttle-Check for Fixed-Wing Models24
Binding Procedure25
Range Checking25
- Throttle-Check for Model Helicopters25
Fast Response ON/OFF26
- Status Display 1 (Standard)26
- Status Display 2 (Flight Phases)26
The Status Displays26
- The "ROYAL SX" Philosophy27
- Using the Keypad27
Operating the ROYAL SX27
- Status Display 3 (Timers)27
- Status Display 4 (System Information)27
ROYAL SX Menu Structure28
- Using Buttons When Operating a Model28
  - The28
- What Are Switches29
- What Are Transmitter Controls29
What Do the Sticks, Sliders and Switches Do? Or: Global Assignments (Lists)29
- What Does "Assignment" Mean29
- Why "Global" Assignments29
  - Which Assignment Lists Are Available30
  - How Are the Assignment Lists Arranged30
- How Are the Assignment Lists Used30
  - Summary: "Global Assignments31
Global Mixer Definitions31
- How Are the Free Mixers Used in Fixed-Wing Model Aircraft31
- Which Global Mixers Are Available31
  - Mixer Names with a "+" Suffix31
- Why "Global" Mixer Definitions31
- How Are Mixers Used in Helicopters32
  - Summary of the "Free Mixers32
Model Templates32
Servo Configuration32
- Which Model Templates Are Available32
- Why Are Model Templates Needed32
  - What Do the Model Templates Contain32
- Allocation - What's that33
- How Is the Calibration Carried out33
Servo Calibration33
- What Can be Calibrated33
Royal Sx34
- Menu I, Call up New Model34
- Selecting the Servo Configuration (Servo Conf.)3234
- Selecting the Template34
Setting up a Fixed-Wing Model34
The Method in Principle34
- Which Model Memory will be Used34
- Confirming with OK35
- Selecting the Assignment35
- Selecting the Stick Mode35
Setting up the New Model in the Transmitter34
12.3. 3436
- Entering the Model Name36
- Preparing the Controls / Switches36
Preparing Servos37
- Calibrating Servos = Setting the Centre and Maximum Travels38
- Checking / Changing the Direction of Servo Rotation3638
Adjusting Ailerons, and Activating Landing Aid (Mixer AILERON+)39
- Activating Differential40
Differential Aileron Travel40
- Setting the Differential Value40
- Mixers (Mixer ELEVATR+ )41
Adjusting Elevator, Activating Elevator Mixers (Mixer ELEVATR+)41
- Spoiler to Elevator = Spoiler Compen-Sation41
  - (Spoiler Input to ELEVATR+ Mixer)41
- Throttle to Elevator = Throttle Compen-Sation41
  - Tr Input to ELEVATR+ Mixer)41
- Activating the Flap Input in the Mixer FLAP42
  - (Camber-Changing Flaps)42
  - Flaps)42
- Butterfly)42
- Activating the Elevator-Tr (Ele -Tr) Input in the43
- Activating the Mixer V-TAIL43
- Assigning V-Tail Servos43
- Checking / Changing the Direction of Servo Rotation4143
Activating Inboard Flaps41
- Changing Flaps) (Mixer FLAP+)41
- Activating the Spoiler Input in the Mixer FLAP42
V-Tail Models43
- 12.10.2. Default Settings in the Menu Flight Phase44
- 12.10.3. Assigning Flight Phase Switches44
- 12.10.4. Locking / Unlocking Flight Phases44
- Adjusting the Remaining Inputs44
- 12.10. Working with Flight Phases44
12.11. Supplementary Functions46
- 12.11.1. D/R and Expo46
- 12.11.2. Activating Combi-Switch46
- 12.11.3. Motor Run Timer46
- Menu I, Call up New Model47
- Selecting the Servo Config(Uration)47
- Selecting the Template47
Setting up a Model Helicopter47
The Method in Principle47
- Setting up a New Model in the Transmitter4547
- Which Model Memory will be Used47
- Confirming with OK48
- Selecting the Assignment48
- Selecting the Stick Mode48
- Checking / Changing Control Settings for Idle / Collective Pitch Min. and Throttle Limiter Min49
  - Changing the Switch on Positions and / or the Switch Assignment50
- Entering the Model Name49
Preparing the Controls / Switches49
Checking / Changing the Servo Assignment50
13.5. Checking / Adjusting the Main Rotor51
- Calibrating Servos = Setting the Centre and Maximum Travels51
Checking / Adjusting the Tail Rotor52
- Checking / Changing the Direction of Rotation of the Tail Rotor Servo52
  - The TAIL Mixer52
    - Basic53
- Differential Yaw (Rudder) Travel53
Gyro53
- Parameter Type of Gyro54
- Mixer Zero Point53
- Offset Value53
  - Collective Pitch to Tail (Revo-MIX)53
- Adjusting Gyro Suppression54
- Activating the Aileron Input in the FLAP+ Mixer 13.855
Throttle, and Associated Functions55
- What Is the Meaning of the Terms Limiter, Curve, Throttle Min., Trim, DTC and Throttle Cut55
- Throttle for Electric Helicopters56
- Throttle for I.C. Powered Helicopters56
Setting the Collective Pitch Curve57
- What Is the Purpose of Switching between Different57
  - Flight Phases57
- 13.10.3. Assigning Flight Phase Switches58
- 13.10.4. Locking / Unlocking Flight Phases58
- 13.10.5. Copying Flight Phases58
- 13.10.6. Changing Flight Phase Names58
- 13.10.7. Setting a Transition Time59
13.10. Working with Flight Phases57
- 13.10.2. Default Settings in the Menu Flight Phase57
Main Menu ¡Setup60
Menu Transmitter60
- One of the Two 3-D Digi-Adjusters60
- Parameter Group Battery60
- Parameter Sound60
  - Parameter Group Safety60
- Defining a Free Mixer61
Menu61
- Method of Working and Options for the Mixer Inputs5961
Mixer Def61
- Parameter Group Display61
- Making Mixer Inputs Switchable63
Menu: Assignment63
- Sub-Menu Assign.controls63
- (Proportional) Transmitter Controls as Switches64
Special Case Extra Sw64
- Sub-Menu Assign.switches64
Menu Training65
- The ROYAL SX as Teacher Transmitter65
- The ROYAL SX as Pupil Transmitter66
Menu User67
- Parameter Language67
- Parameter Name67
- Parameter PIN (Access Code)67
Main Menu ¢Control68
Menu Control68
Menu Control69
Menu ¢Triggerpoint70
- Parameter Step (Trim Increment)70
- Parameter Trim70
- Parameter D/R (Dual-Rate)71
- Parameter Expo71
- Parameter Fixed Value71
- Parameter Mode (Throttle Trim)71
- Parameter Trvl (Travel)71
- Parameter Collect. P172
- Parameter Limit72
- Parameter Throttle P172
- Parameter Time72
- Parameter Throttle Min. (Idle, Throttle Limiter)73
- Ail.diff. (Aileron Differential)74
- Combi-Sw. (Combi-Switch)74
Control Menu Screen Layout70
Main Menu74
Mixer74
- Controls MIX (Transmitter Control Mixer)75
- Setting up Free Mixers75
- Comp. Mixer (Compensation Mixer)76
Menu Mixer Fixed-Wing Models74
Menu: Mixer Helicopters76
- Gyro (Gyro Mixer)77
- TAIL (Tail Rotor Mixer)77
- Basic Offset Value78
- Collective Pitch to Tail (Revo-MIX)78
- Differential Yaw (Rudder) Travel78
- Mixer Zero Point78
- Rotor Head (Swashplate Mixer)78
Main Menu Servo K80
Menu Calibrate80
- Sub-Menus for Individual Servos80
Menu Assignment81
- The Procedure for Calibrating a Servo81
- ROYAL SX 16 Only: Special Features Relating to Servo 11 and / or Servo 12 (PPM Modulation)82
17.4. 8183
- Menu Monitor83
- Menu: Test Run83
Main Menu Timer a83
- Non-MULTIPLEX Receivers with Ten Channels83
Slot, Sum and Interval Timers: Display and Reset83
- Example: Monitoring the Slot Time (Time Limit)84
  - Summary: Timer 1 Μslot85
Menu ¥Timer, Model for Flight Time Per Season / Session84
- Summary Timer Model84
Menu ¥Timer, Μslot84
- Example: Recording Motor Run Time85
Menu ¥Timer, ´Sum85
- Summary Timer 2 ´Sum85
Menu ¥Timer, ¶¶Interval86
- Example86
- Monitoring Motor Run Time Per Climb86
- Summary Timer 3 ¶¶Interval86
Total Transmitter Operating Time86
Main Menu Memo I87
Selecting a Model Memory87
Copying a Model Memory87
Erasing Model Memories88
Managing Flight Phases88
- Selecting Flight Phase Names88
Checking / Changing the Properties of the Current Model Memory89
- Copying Flight Phases89
  - Setting the Flight Phase Transition Time89
- Locking / Unlocking Flight Phases89
Setting up a New Model89
- What Can be Changed89
- What Is Displayed89
Menu: Modulation90
Special Facilities91
Using the 3-D Digi-Adjuster to Alter Settings in Flight91
PC Data Back-Up / Updating92
Royal Sx93
- Using a Flight93
- Aluminium Stick Top with Switch or Button - Installation and Functions93
- Installing the Stick Tops93
Simulator93
- Error Messages93
- Accessories93
Model Templates in Detail96
- Two-Position Switch96
- BASIC Model Template97
- ACRO Model Template98
- HOTLINER Model Template99
- DELTA Model Template101
- GLIDER Model Template102
- FLAPS Model Template103
- Heliccpm Model Template106
- Helimech Model Template106
Fixed-Wing Model Aircraft96
21.2. Model Helicopters106
Servo Configurations107
22 Appendix: “Global” Lists109
Appendix: "Global" Lists109
Global Transmitter Control and Switch Assignments109
Pre-Set Mixers110
Care and Maintenance111
Disposal111
Advice and Service111

Multiplex Royal SX 9 User Manual

Table of Contents

Questions and Answers:

Multiplex Royal SX 9 Specifications

Related product manuals

Brand	Multiplex
Model	Royal SX 9
Category	Remote Control
Language	English