4. Expand Remote Systems in the configuration tree and locate your system.
Tip MAX lists the system under the model number followed by the serial
number, such as NI-CRIO-9147-1856AAA.
Configuring Startup Options
Complete the following steps to configure the NI 9147 startup options in MAX.
1. In MAX, expand your system under Remote Systems.
2. Select the Startup Settings tab to configure the startup settings.
NI 9147 Startup Options
You can configure the following NI 9147 startup options.
Table 1. NI 9147 Startup Options
Startup Option Description
Force Safe
Mode
Rebooting the NI 9147 with this setting on starts the NI 9147 without
launching LabVIEW Real-Time or any startup applications. In safe mode,
the NI 9147 launches only the services necessary for updating
configuration and installing software.
Disable FPGA
Startup App
Rebooting the NI 9147 with this setting on prevents autoloading of any
FPGA application.
Note When you reset the cRIO-906x controller either
programmatically or by using the RESET button, you also reset
the FPGA. All FPGA I/O lines are tri-stated after a reset, and
will enter predefined states once loaded.
Enable Secure
Shell (SSH)
Logins
Rebooting the NI 9147 with this setting on starts sshd on the NI 9147.
Starting sshd enables logins over SSH, an encrypted communication
protocol.
Note Visit ni.com/info and enter the Info Code openssh for
more information about SSH.
NI 9147 Features
The NI 9147 provides the following features.
Ports and Connectors
The NI 9147 provides the following ports and connectors.
NI 9147 User Manual | © National Instruments | 3
To Next Page
Loading...
Need help?
General
