Do you have a question about the National Instruments USB-6001 and is the answer not in the manual?
Max Sample Rate | 20 kS/s |
---|---|
Analog Output Channels | 2 |
Counter/Timers | 1 |
Interface | USB |
Storage Temperature Range | -20 °C to 70 °C |
Analog Input Channels | 8 single-ended or 4 differential |
Analog Input Range | +/-10 V |
Analog Output Range | 0 V to 5 V |
Power Requirements | USB Powered |
Operating Temperature Range | 0 °C to 50 °C |
Relative Humidity Range | 10% to 90% noncondensing |
Analog Input Resolution | 14-bit |
Analog Output Resolution | 12-bit |
Instructions for installing the necessary NI-DAQmx software and registering the product.
Steps for connecting the terminal plugs and USB cable to the device and computer.
Information on locating and utilizing example programs for NI-DAQmx driver software.
Configuration options for analog input channels: differential (DIFF) and referenced single-ended (RSE).
How to connect loads to the analog output channels (AO 0, AO 1) referenced to AO GND.