EasyManua.ls Logo

Navien NCB-240/130H - User Manual

Navien NCB-240/130H
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNING
If the information in these instructions is not followed exactly, a fire or explosion may
result, causing property damage, personal injury, or death.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas suppliers instructions.
If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas
supplier.
The installation must conform with local codes or, in the absence of local codes, the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.
H
NSF/ANSI 372
Keep this manual near this boiler for future reference
whenever maintenance or service is required.
* The wetted surface of this product contacted by consumable water
contains less than one quarter of one percent (0.25%) of lead by weight.
Installation & Operation Manual
NCB-H Condensing Combi-Boilers
Model
NCB-190/060H
NCB-190/080H
NCB-240/110H
NCB-240/130H
NCB-250/150H

Table of Contents

Other manuals for Navien NCB-240/130H

Questions and Answers

Summary

Installation & Operation Manual NCB-H Condensing Combi-Boilers

Safety Information: DANGER - Gas Leak and Flammable Products

Instructions for gas leaks and warnings about storing flammable products near the boiler.

Safety Information: WARNING - Boiler Operation Hazards

Warnings about operating the boiler under various unsafe conditions, including fire and CO poisoning.

Safety Information: DANGER - Hot Water Scald Hazard

Warning about the risk of scalding from high water temperatures and burn prevention measures.

2. Installing the Boiler

2.1 Installation Location Considerations

Factors to consider when selecting a suitable installation location for the boiler.

Installation Clearances and Venting

Required clearances for installation and guidelines for proper venting and ventilation.

2.2 Boiler Mounting Procedure

Step-by-step instructions for securely mounting the boiler unit to a wall.

Boiler Weight and Handling Warnings

Warnings about the boiler's weight, proper lifting techniques, and installation orientation.

3. Installing the System Piping

3.1 Space Heating System Installation Guidelines

Guidelines for installing the space heating system to ensure efficient heat exchanger operation.

3.2 Domestic Hot Water (DHW) System Installation

Information on how the boiler provides domestic hot water on demand.

3.3 Condensate Drain Connection

Options and instructions for connecting the condensate drain to a disposal system.

3.4 System Filling Procedure

Steps for filling the boiler system with water, including opening relief valve and air vent.

3.5 Water System Testing

Procedure for performing a fill test to ensure the water system is installed properly.

3.7 Electrical Connections Overview

General guidelines and warnings for electrical connections to the boiler.

4. Connecting the Gas Supply

Gas Supply Connection Warnings and Cautions

Warnings about gas type, pressure, licensed professionals, leak detection, and conversion.

4.2 Inlet Gas Pressure Measurement

Importance of sufficient inlet gas pressure and how to measure it.

Measuring the Inlet Gas Pressure Procedure

Step-by-step instructions for measuring the boiler's inlet gas pressure.

5. Venting for Combustion Air

5.1 Boiler Venting Requirements

Guidelines for ensuring proper venting for clean intake and exhaust air.

5.3 Selecting a Vent Type

Guidance on selecting appropriate vent types, including direct and non-direct venting.

5.4 Vent Pipe Material Selection

Recommended vent materials for USA and Canada, and prohibited materials.

5.6 Vent Termination Options

Determining vent termination type and approved PVC and polypropylene options.

6. Setting the DIP Switches

6.2 DIP Switch 2 Settings

Explanation of DIP Switch 2 settings for gas type, altitude, and other functions.

7. Connecting the Power Supply

Power Supply Connection Warnings and Guidelines

Guidelines and warnings for connecting the power supply to the boiler.

9. Installing a Common Vent System

9.1.1 Common Vent System Installation Guidelines

Guidelines for safe and correct installation of common vent systems.

Selecting Vent Pipe Materials for Common Venting

Chart of recommended vent pipe materials for Category IV appliances.

11. Operating the Boiler

11.1 First-Time Boiler Operation

Step-by-step instructions for operating the boiler for the first time safely.

11.3 Boiler Start-Up Wizard

Guide to completing the initial setup wizard before using the boiler.

11.6.3 Setting Operation Parameters

How to set boiler operation parameters, requiring a password.

11.7 Understanding Error Codes

Chart of error codes, their reasons, and self-diagnostic/action steps.

12. Appendixes

Gas;Air Ratio Adjustment with Combustion Analyzer

Procedure for measuring and adjusting gas/air ratio using a combustion analyzer.

Gas;Air Ratio Adjustment with Digital Manometer

Procedure for measuring gas/air ratio using a digital manometer.

12.2 Wiring Diagram

Comprehensive wiring diagram for the NCB-H boiler.

12.3 Ladder Diagram

Ladder diagram illustrating the boiler's control logic and connections.

Navien NCB-240/130H Specifications

General IconGeneral
CategoryBoiler
TypeCombi Boiler
BrandNavien
ModelNCB-240/130H
Fuel TypeNatural Gas or Propane
Domestic Hot Water Capacity130, 000 BTU/hr
Efficiency95%
Vent Diameter (inches)3 inch
Vent TypePVC

Related product manuals