Neato Botvac
™
User Manual Neato Botvac
™
User Manual
Use SCROLL button to Set Hour
and then press SELECT button.
Use SCROLL button to Set Minutes
and then press SELECT button.
If the time is correct press SELECT
button to save the time.
Confirmation message will show on
the screen.
CLEANING
Botvac has two cleaning modes –
CLEAN House and CLEAN Spot.
• CLEAN House mode will clean your house.
• Clean Spot mode will clean a 4’ (1.2 m) x 6’ (1.8 m) area.
IMPORTANT! To start cleaning, the LED around the right
button must be green or blinking green and Botvac must
be turned on.
• If the right button is not green or blinking green, put
Botvac up against the charge base to charge.
• If the screen is not lit, press the right button to
wake up Botvac.
CLEAN HOUSE
MODE
Press the right button below the dirt bin with the
icon.
The screen will indicate that Botvac
is cleaning the house.
Botvac will come off its charge base
and scan the area.
6
To Next Page
Loading...
Need help?
General
