8
ENGLISH
Cleaning with the MyNeato app
Using the MyNeato app to clean
Your Neato cleans the entire floor plan on one level,
moving automatically from room to room. From
the app you can start cleaning, pause, resume, and
cancel to return to charge base.
To clean a house:
1. Remove small objects and loose cords from the floor.
2. Make sure that your Neato is placed at the
charge base.
3. Tap
to start cleaning.
4. Tap
to pause cleaning.
5. Tap to continue cleaning.
6. Tap Cancel and return to base button to send your
Neato back to the charge base.
During cleaning, your Neato comes o its charge
base, explores its surroundings, and starts cleaning in
sections approximately 15 x 15 feet (4.6 x 4.6 meters)
in size, depending on layout and furniture. Your Neato
continues to clean the entire room on one level,
section by section, until the entire area is cleaned. It
then moves from room to room to continue cleaning.
If your Neato cleans a room partially, it will return to
complete that room before finishing the job.
Moving a Neato robot mid-cleaning
Do not pick up your Neato while it is moving.
Otherwise, it can become disoriented, deviate from its
normal smart behavior, and have diculty finding its
charge base.
To pause the cleaning, press once while your
Neato is cleaning. If you then lift your Neato, put it
back down within 1 foot of where you picked it up.
Resume
To Next Page
Loading...
Need help?
General
Weight and Dimensions
