EasyManuals Logo
Home>NEC>Monitor>ACCUSYNC LCD52V

NEC ACCUSYNC LCD52V User Manual

NEC ACCUSYNC LCD52V
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
Specifications –continued
Monitor AccuSync LCD72V Notes
Specifications Monitor
LCD Module Diagonal: 17.0 inch Active matrix; thin film transistor (TFT)
Viewable Image Size: 17.0 inch liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count): 1280 x 1024 pitch; 250cd/m
2
white luminence;
450:1 contrast ratio, typical
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors Analog input: 16,194,277 Depending on display card used.
Maximum Left/right: 70°/70° (CR>10)
Viewing Angles Up/Down: 65°/60° (CR>10)
Synchronization Horizontal: 31.5 kHz to 81.1 kHz Automatically
Range Vertical: 55 Hz to 76 Hz Automatically
Resolutions Supported 720 x 400*
1
: VGA text
Some systems may not support
640 x 480*
1
at 60 Hz to 75 Hz
all modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 70 Hz
1152 x 870*
1
at 75 Hz
NEC-Mitsubishi Electronics Display cites
1280 x 960
*
1
at 60 Hz to 75 Hz
recommended resolution at 60 Hz for
1280 x 1024 at 60 Hz to 75 Hz................
optimal display performance.
Active Display Area Horizontal :
338 mm/13.3 inches
Vertical :
270.3 mm/10.6 inches
Power Supply
100
-240 V
~ 50/60 Hz
Current Rating 0.6 - 0.4 A/100-240V
Dimensions
375.4 mm (W) x 389 mm (H) x 180 mm (D)
14.8 inches (W) x 15.3 inches (H) x 7.1 inches (D)
Weight 4.6 kg
10.1 lbs
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -10°C to +60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
AS52V72V92VManual080404.p65 8/5/04, 7:46 PM13

Other manuals for NEC ACCUSYNC LCD52V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC ACCUSYNC LCD52V and is the answer not in the manual?

NEC ACCUSYNC LCD52V Specifications

General IconGeneral
BrandNEC
ModelACCUSYNC LCD52V
CategoryMonitor
LanguageEnglish

Related product manuals