• Voice Call.
• Call Pick Up.
4. Recall button
Press to terminate the established call and reseize internal dial tone.
5. Function key
Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys.
Terminal setup functions include:
• Microphone on/off : FNC+1
• Receiver volume : FNC+2
• Ringer tone : FNC+3 (keep pressing for tone 1, 2, 3 or 4.)
• Hands-free on/off : FNC+5 (on) FNC+6 (off)
6. Conference button
To establish a conference call. A red indicator provides visual confirmation that a conference is
in session. See instructions below.
7. Last number redial key
Used to activate last number called and speed dialing. (Lift handset and press LNR/SPD to
select.
Then press # to dial the selected number.)
8. Speaker button
To control the built-in speaker for handsfree dialling and monitoring. Full handsfree dialling
operation is a standard feature. A red indicator provides visual confirmation that the speaker is
on.
9. Answer button
When the light on this key is lit, press to answer a waiting call.
10. Transfer button
To transfer call, or make a second call.
11. Hold button
To place a call on hold. Note: Press twice to place a call on exclusive hold (no-one else can pick
up.) To retrieve the held call lift the handset and press the flashing line. You can also put a call
on hold then make another call. You can swap between the two calls by pressing call hold, or
hang up on second call and original will ring back.
ATEL Communications, Inc. www.atelcommunications.com 858.646.4600
To Next Page
Loading...
Need help?
General
