EasyManuals Logo
Home>NEC>Monitor>MultiSync E243F

NEC MultiSync E243F User Manual

NEC MultiSync E243F
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
English−17
English
5. Please check that you can still raise and lower the monitor screen after you have installed the cables (Figure 5 and Figure 6).
Figure 5 Figure 6
Power Cord USB Cable
DisplayPort Cable
USB Cable Power Cord
DisplayPort Cable
6. Connect the power cord to a power outlet.
NOTE: Please refer to the Caution section of this manual for proper selection of the AC power cord (see page 7).
Please make sure that enough power is supplied to the monitor. Please refer to “Power Supply” in the
“Chapter 4 Specifications” on page 27.
7. Turn on the monitor by pressing the button and then turn on the computer.
NOTE: If you have any problems please refer to the Troubleshooting section of this User’s Manual (see page 23).
Adjustable Stand with Pivot Capability
Hold the monitor on each side and adjust height, tilt and swivel as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Tilt and Swivel
CAUTION:
Rotation, Raise and Lower
CAUTION: Please refer to “CAUTION 5”.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync E243F and is the answer not in the manual?

NEC MultiSync E243F Specifications

General IconGeneral
BrandNEC
ModelMultiSync E243F
CategoryMonitor
LanguageEnglish

Related product manuals