NEC MultiSync EA244WMi User Manual

English-15
English
MENU Tools
LANGUAGE
Selects the language used by the OSD.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. You can select how long the monitor waits after the last touch
of a key to shut off the OSD control menu. The preset choices are 10-120 seconds by 5-second increments.
OSD LOCK OUT
This control completely locks out the access to all OSD control functions except for BRIGHTNESS, CONTRAST and
VOLUME.
To activate the OSD Lock Out function, enter the OSD menu, select OSD LOCK OUT, then press “SELECT” and
RIGHT simultaneously. To deactivate, press “SELECT” and LEFT simultaneously.
HOT KEY
When this function is activated, ECO MODE, BRIGHTNESS and VOLUME can be adjusted without entering the OSD
menu by using the front keys.
ON: The “ECO” touch key on the bezel is enabled and can toggle among ECO settings.
The Left/Right key adjusts the brightness level.
The Up/Down key adjusts the volume level.
OFF: The HOT KEY function for “ECO”, “Left/Right” and “Up/Down” functions are disabled.
SIGNAL INFORMATION
If you select “ON”, monitor displays “VIDEO INPUT MENU” after changing the input.
If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after changing the input.
SENSOR INFORMATION
If you select “ON”, monitor displays “HUMAN SENSOR ON” message. If you select “OFF”, monitor doesn’t display
“HUMAN SENSOR ON” message.
KEY GUIDE
If you select “ON”, the Key Guide appears on screen when the OSD control menu is accessed. The Key Guide will
rotate when the OSD control menu is rotated.
DATA COPY
To initiate data copy from the master monitor to the sub monitor(s), select “DATA COPY” and touch “SELECT”.
A “PROCEEDING...” indicator will appear on the screen.
NOTE: This function is only intended for the master monitor in ControlSync.
All of the settings specifi ed in the ControlSync chart (see page 23) will be copied from the master monitor to
the sub monitor(s).
CUSTOMIZE SETTING
Store the current settings for easy recovery.
To store current settings: Touch “SELECT”. After a warning message appears, touch “RESET”, current settings are
stored.
To restore settings: Hold “MENU” for 3 seconds or more while the OSD menu is off.

NEC MultiSync EA244WMi Specifications

General

3D	No
HD type	-
Aspect ratio	16:10
Screen shape	Flat
Response time	6 ms
Backlight type	W-LED
Display diagonal	24 \
Display resolution	1920 x 1200 pixels
Display technology	LED
Contrast ratio (dynamic)	25000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Digital vertical frequency	56 - 60 Hz
Digital horizontal frequency	31.5 - 77 kHz
Display brightness (typical)	350 cd/m²
Supported graphics resolutions	1920 x 1200 (WUXGA)
TV tuner integrated	Yes
Power consumption (economy mode)	16 W
USB hub version	2.0
DVI-I ports quantity	0
USB Type-A downstream ports quantity	4
RMS rated power	2 W
Number of speakers	2
Pivot angle	0 - 90 °
LED indicators	Power
Tilt angle range	-5 - 30 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (max)	29 W
Annual energy consumption	31 kWh
Power consumption (standby)	- W
Power consumption (typical)	21 W
Power consumption (PowerSave)	0.47 W
Certification	CE; Energy Star 6.0; FCC Class B; GEEA/Energy Label; ISO 9241-307 (pixel failure class I); MPR III; PCT/Gost; RoHS; TCO 6.0; TCO Certified Edge Displays 1.2.; TÜV Ergonomics; TÜV GS; UL/C-UL or CSA
Product color	Black
Sustainability certificates	EPEAT Gold, ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DisplayPort, USB

Weight and Dimensions

Depth (with stand)	230 mm
Height (with stand)	408.9 mm
Weight (with stand)	7500 g
Depth (without stand)	- mm
Width (without stand)	556.2 mm
Weight (without stand)	- g