English-26
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help defi ne and comply with the latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefi t by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specifi c information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe),
http://www.nec-display.com (in Japan) or
http://www.necdisplay.com (in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
Mode Power consumption LED colour
Maximum Operation
83 W (EA274WMi)
107 W (EA304WMi)
Blue
Normal Operation (at TCO testing)
44 W Default setting, USB/Audio sleeping (EA274WMi)
70 W Default setting, USB/Audio sleeping (EA304WMi)
Blue
Energy Saving Mode
0.8 W (EA274WMi)
0.7 W (EA304WMi)
Amber
Off Mode
0.4 W (EA274WMi)
0.3 W (EA304WMi)
Unlit
For additional information visit:
http://www.necdisplay.com/ (in USA)
http://www.nec-display-solutions.com/ (in Europe)
http://www.nec-display.com/global/index.html (Global)
For Energy Saving information: [Default setting: POWER SAVE/ON]
For ErP/EnergyStar requirement:
Setting: Tools
POWER SAVE TIMER ON
Power consumption: 0.5 W or less.
Time for power management function: Approx. 120 min.
For ErP (Network standby) requirement:
Setting: Tools
POWER SAVE TIMER OFF
Power consumption: 6.0 W or less (with 1 port activating) / 6.0 W or less (with all ports activating).
Time for power management function: Approx. 1 min.
Manufacturer’s Recycling and Energy Information
To Next Page
Loading...
Need help?
General