EasyManuals Logo
Home>NEC>Monitor>MultiSync LCD175VXM

NEC MultiSync LCD175VXM User Manual

NEC MultiSync LCD175VXM
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
Specications
LCD Module Diagonal: 17.0 inch Active matrix; thin film transistor (TFT)
Viewable Image Size: 17.0 inch liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count): 1280 x 1024 pitch; 270cd/m2 white luminence;
500:1 contrast ratio, typical
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI
Sync: Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors Analog input: 16,194,277 Depending on display card used.
Maximum Left/right: 70°/70° (CR>10)
Viewing Angles Up/Down: 65°/60° (CR>10)
Synchronization Horizontal: 31.5 kHz to 81.1 kHz Automatically
Range Vertical: 56 Hz to 76 Hz Automatically
Resolutions Supported 720 x 400*1 : VGA text Some systems may not support
640 x 480*1 at 60 Hz to 75 Hz all modes listed.
800 x 600*1 at 56 Hz to 75 Hz
832 x 624*1 at 75 Hz
1024 x 768*1 at 60 Hz to 75 Hz
1152 x 864*1 at 70 Hz to 75 Hz
1152 x 870*1 at 75 Hz NEC DISPLAY SOLUTIONS cites
1280 x 960*1 at 60 Hz to 75 Hz recommended resolution at 60 Hz for
1280 x 1024 at 60 Hz to 75 Hz................ optimal display performance.
Active Display Area Horizontal : 338.0 mm/13.3 inches
Vertical : 270.0 mm/10.6 inches
Power Supply 100-240 V ~ 50/60 Hz
Speaker Practical Audio Output 1+1 watts
Current Rating 0.6 - 0.4 A/100-240V
Dimensions 368.0 mm (W) x 379.0 mm (H) x 205.0 mm (D)
14.5 inches (W) x 14.9 inches (H) x 8.1 inches (D)
Weight 4.3 kg
9.5 lbs
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 10% to 80%
Altitude: 0 to 10,000 Feet
Storage Temperature: -10°C to +60°C/14°F to 140°F
Humidity: 10% to 85%
Altitude: 0 to 40,000 Feet
Monitor MultiSync
Specifications LCD175VXM Notes
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear
different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel
technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution
must be done.
NOTE: Technical specifications are subject to change without notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync LCD175VXM and is the answer not in the manual?

NEC MultiSync LCD175VXM Specifications

General IconGeneral
BrandNEC
ModelMultiSync LCD175VXM
CategoryMonitor
LanguageEnglish

Related product manuals