To Next Page

To Previous Page

English-15

English

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.

Some display cards may not display an image correctly.

Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.

Resolution

Scanning frequency Remarks

Horizontal Vertical

640 x 480 31.5 kHz 60 Hz

800 x 600 37.9 kHz 60 Hz

1024 x 768 48.4 kHz 60 Hz

1280 x 768 48 kHz 60 Hz

1360 x 768 48 kHz 60 Hz

1280 x 1024 64 kHz 60 Hz

1600 x 1200 75 kHz 60 Hz Compressed image

1920 x 1080 67.5 kHz 60 Hz Recommended resolution

• If you use with a Macintosh PowerBook, set “Mirroring” to Off on your PowerBook.

Refer to your Macintosh’s owner’s manual for more information about your computer’s video output requirements and any

special identiﬁ cation or conﬁ guration your monitor’s image and monitor may require.

• Input TMDS signals conforming to DVI standards.

• To maintain display quality, use a cable that conforms to DVI standards.

Connecting a DVD Player or Computer with HDMI out

• Please use an HDMI cable with HDMI logo.

• It may take a moment for the signal to appear.

• Some display cards or drivers may not display an image correctly.

• When you use a computer with HDMI out, please set OVER SCAN to “OFF” (see page 28).

Connecting a Computer with DisplayPort

• Please use DisplayPort cable with DisplayPort compliance logo.

• It may take a moment for the signal to appear.

• Please note that when connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not

appear.

• Select DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync X464UN and is the answer not in the manual?

NEC MultiSync X464UN Specifications

General