To Next Page

To Previous Page

English-37

English

Network Setting

Click “NETWORK” on the left side of HOME.

IP SETTING Set for IP ADDRESS setting.

AUTO: Automatically assign an IP address.

MANUAL: Set your IP address of the network connected to the monitor.

NOTE: Consult your network administrator for the IP address when [AUTO] is selected for

[IP SETTING].

IP ADDRESS Set your IP address of the network connected to the monitor when [MANUAL] is selected for

[IP SETTING].

SUBNET MASK Set your subnet mask number of the network connected to the monitor when [MANUAL] is selected

for [IP SETTING].

DEFAULT GATEWAY Set your default gateway of the network connected to the monitor when [MANUAL] is selected for

[IP SETTING].

NOTE: Set as [0.0.0.0] to delete the setting.

DNS Set for IP ADDRESS setting of DNS server.

AUTO: Automatically assign an IP address of DNS server connected to the monitor.

MANUAL: Set your IP address of DNS server connected to the monitor.

PRIMARY DNS Set your primary DNS settings of the network connected to the monitor.

NOTE: Set as [0.0.0.0] to delete the setting.

SECONDARY DNS Set your secondary DNS settings of the network connected to the monitor.

NOTE: Set as [0.0.0.0] to delete the setting.

NOTE: The following settings will reset back to the factory setting when “IP ADDRESS RESET” is selected by an EXTERNAL

CONTROL of OSD:

[IP SETTING]: AUTO, [IP ADDRESS]: 192.168.0.10, [SUBNET MASK]: 255.255.255.0, [DNS]: AUTO [DEFAULT

GATEWAY], [PRIMARY DNS] and [SECONDARY DNS] are blank.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync X464UN and is the answer not in the manual?

NEC MultiSync X464UN Specifications

General