SV9100 USER TRAINING
1/ Volume Key
To scroll the volume of your handset press up or down on the silver navigator dial on
your handset, located in the bottom right hand corner
- ↕ the listening volume when you are on speaker or have the handset lifted.
- ↕ the ringing volume when phone is ringing.
- When the phone is not in use, the volume key alters the contrast on the screen.
2/ External Call - Call Light flashes red.
Internal Call - Call Light flashes red & the name of the extension calling appears
3/ Making Calls
To make a call either pick up your handset or press the speaker key for hands free.
Dial 0, then the number you wish to call.
4/ Microphone Control
- Press the MIC key to turn the external microphone on or off.
- Red light above MIC indicates if the microphone is turned on or off. (It is
recommended that your microphone is always left on.)
5a/ Placing a Call on Hold
- During conversation, press the HOLD key
- The line key that the call came in on will begin a steady flash
5b/ Retrieving a Call Placed on Hold
- Pick up the handset.
- Press the flashing button.
NB: Flashing green means the call was placed on hold by your handset, red means it
was placed on hold by another handset.
6/ Transferring Calls
- Press Hold
- Dial station number (or press programmed key)
- Announce call
- Press transfer
- Hang up
7/ Message Light Cancel
- If you have a flashing message light on your handset
- Pick up the handset and dial 773
- You will hear a confirmation tone, and the light will be cancelled.
To Next Page
Need help?
General