Sv9100 Multi-Line Terminal
Quick User Guide
For additional information search for “NEC Sv9100 Multi-Line Terminal User Guide” in your web browser
Lift the Handset or press Speaker (For the
remainder of this guide we will refer to lifting the
handset but pressing the Speaker key is also valid)
• Dial the required internal number
• For external calls, dial 0 first for an outside
line
Ask the caller to please hold:
• Press Hold
-
hold key flashes.
• You may replace handset if you wish.
To retrieve a call:
• Lift the handset.
• Press the Flashing Line Key
With a call in progress:
• Press Transfer
• Dial an extension, external number or
programmed one-touch key and announce
the call when they answer (optional)
• Replace the handset
Note: If the called extension is busy or does not
answer, press the Green Flashing Key to return
to your caller. If the extension answers and
indicates that they do not wish to take the call,
ask them to hang up and you will be put directly
back to the original caller.
When receiving call waiting tone:
• Press the Answer key to access the new
call - the Answer LED goes out and the
original call is put on hold
If additional calls are received, press Answer to
place the current call on hold and connect to the
next call so long as Call Appearance keys are
available
Note: To toggle between calls press the Hold
key then the required Flashing Call Key
Last dialed number
• Lift the handset and press Redial then #
to initiate the call
Recently dialed numbers
• Without lifting handset press Redial (Left
Cursor key).
• Press the Cursor button up or down to
search for the required number
•
Lift the handset to initiate the call
To answer a ringing extension in your group:
• Lift the handset and dial * #
To answer a call ringing at a specific extension:
• Lift the handset and dial * *
plus the other extensions number
To Next Page
Need help?
General