Nedap PowerRouter PR37S Application Guideline

3
Introduction
This document explains, step-by-step, how to install a PowerRouter with batteries (PowerRouter Solar Battery
– PRxxSB-BS) to create a self-use system. It also describes important aspects that must be considered during
installation.
The steps in this document are based on the standard procedure for connecting the system. Detailed
information about the installation can be found in the installation manual that comes with the PowerRouter. That
manual can be downloaded from www.PowerRouter.com. Nedap recommends you read this manual thoroughly
before beginning the installation.
If you have any questions during con guration and installation, please get in touch with your local PowerRouter
Business Partner.
The PowerRouter is intended for use in a single-family household with a maximum service entrance rating of
13.8 kVA. The PowerRouter is the core element of the self-use system, as shown in the following section.
Figure 1: Schematic depiction of a self-use system with PowerRouter
017763
017763
LOCAL OUT

Nedap PowerRouter PR37S Specifications

General

Brand	Nedap
Model	PowerRouter PR37S
Category	Inverter
Language	English