en Troubleshooting
34
2.
Push down lightly on the first intermediate pane
around , slide the retainer in at an angle and
push down until it clicks into place.
a The retainer has been inserted.
3.
Insert the inner pane into the fixing rail at an angle
towards the back .
4.
Push the inner pane from above until it locks into
place .
22 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
22.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not working. The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
"Language English" appears on
the display.
There has been a power cut.
▶
Configure the initial configuration settings.
→"Initial use", Page11
The appliance cannot be
switched on; appears on the
display.
Automatic childproof lock or childproof lock is activated
▶
Press and hold the button until "Childproof lock deactivated" appears on
the display.
Appliance will not start or cuts
out during operation.
Different causes are possible.
▶
Check any notifications that appear on the display.
→"Displaying information", Page13
To Next Page
Loading...
Need help?
General
