en HomeConnect
20
Basic setting Selection
Audible signal ¡ Short duration
¡ Medium duration
¡ Long duration
Button tone ¡ Off (except for )
¡ On
Display brightness 5 settings
Clock display ¡ Digital
¡ Off
Lighting ¡ On during operation
¡ Off during operation
Auto resume ¡ When you close the door
¡ No auto resume
Automatic childproof
lock
¡ Deactivated
¡ Activated
Operation after
switch-on
¡ Main menu
¡ Types of heating
¡ Microwave
¡ Microwave combination
¡ Baking and roasting assist-
ant
¡ Microwave programs
Night-time dimming ¡ Switched off
¡ On (display dimmed
between 10 p.m. and 5.59
a.m.)
Warning: Baking
tray in MW
¡ Indicators/symbols
¡ Do not display
Brand logo ¡ Indicators/symbols
¡ Do not display
Dry microwave ¡ On
¡ Off
Fan run-on time ¡ Recommended
¡ Minimum
Home Connect HomeConnect Settings
→"HomeConnect ", Page20
Factory settings Restore
15.2 Changing MyProfile
1.
Press to switch the appliance on.
2.
Press .
3.
Use the or button to select "MyProfile" .
4.
Use the button to navigate to the next row.
5.
Use the or button to select a setting.
6.
Use the button to navigate to the next row.
7.
Use the or button to change the setting.
8.
Press .
9.
To save your settings, use the button to select
"Save".
‒ To discard your settings, use the button to se-
lect "Discard".
15.3 Changing your favourites
In Favourites, you can set the heating functions that
you want to appear in the heating functions menu.
Note:
Some heating functions cannot be deactivated:
¡ CircoTherm hot air
¡ Circo-roasting
¡ Full-surface grill
1.
Press to switch the appliance on.
2.
Press .
3.
Use the or button to select "MyProfile" .
4.
Use the button to navigate to the next row.
5.
Use the or button to select "Favourites".
6.
Use the button to select "Set favourites".
7.
Use the or button to select the required heating
function.
8.
Use the button to navigate to the next row.
9.
Use the or button to select a setting.
Setting Display in the heating func-
tions menu?
Activated Yes
Deactivated No
10.
Press .
11.
To save your settings, use the button to select
"Save".
‒ To discard your settings, use the button to se-
lect "Discard".
16 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.