en Operating the appliance
14
3. Use the & button to navigate to the next line.
4. Use the ( or ) button to select the current minute.
5. Press the % button repeatedly until "Time" appears.
6. Use the ) button to select the next setting.
Setting the date
1. Use the & button to navigate to the bottom line.
2. Use the ( or ) button to select the current day.
3. Use the & button to navigate to the next line.
4. Use the ( or ) button to select the current month.
5. Use the & button to navigate to the next line.
6. Use the ( or ) button to select the current year.
7. Press the % button repeatedly until "Date" appears.
8. Use the ) button to apply the settings.
The initial use is complete.
Notes
■ You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 20
■ After connecting the appliance to the power or
following a power cut, the settings for initial use are
shown in the display.
Set up Home Connect
1. Use the & button to navigate to the bottom line "Set
with assistant".
2. Further instructions can be found in section
~ "Home Connect" on page 21
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
1. Remove the accessories from the cooking
compartment.
2. Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3. Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
4. Use the # touch button to switch on the appliance.
5. Set the specified type of heating and temperature,
then start the appliance. ~ "Setting and starting the
appliance operation" on page 14
6. Keep the kitchen ventilated while the appliance is
heating.
7. Use the # touch button to switch off the appliance
once the specified time has elapsed.
8. Wait for the cooking compartment to cool down.
9. Clean the smooth surfaces with soapy water and a
dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Oper at i ng the appl i anc e
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the # touch
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Notes
■ Certain indicators and instructions (e.g. about
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
■ After the appliance has completed an operation, you
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
■ Switch off your appliance when you do not need to
use it. If no settings are made for a long time, the
appliance switches off automatically.
Setting and starting the appliance operation
Example: ‚ "Hot air" at 170 °C
1. Touch the # touch button to switch on the
appliance.
You are taken directly to the ¢ "Types of heating"
menu.
Settings
Type of heating
‚
Temperature Maximum
Cooking time 1 hour
Display Temperature
Residual heat high above 120 °C
Residual heat low between 60 °C und 120 °C
&
©
+RWDLU
To Next Page
Loading...
Need help?
General