EasyManuals Logo
Home>NEFF>Dishwasher>S153ITX02G

NEFF S153ITX02G User Manual

NEFF S153ITX02G
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
en Installation and connection
12
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1. "Follow the safety instructions."
→Page4
2. "Follow the instructions for elec-
trical connection." →Page12
3. Check the Scope of supply and
the condition of the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6. "Install the drainage connection."
→Page12
7. "Install the drinking water connec-
tion." →Page12
8. Connect the appliance to the
power supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3. When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4. Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the "Technical data"
→Page54.
3. When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡ Please follow the "Safety instruc-
tions" →Page5.
¡ Connect the appliance to alternat-
ing current only, in the range of
220 - 240V and 50Hz or 60Hz.
¡ Please note that the water safety
system is only functional if there is
a power supply.
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.

Table of Contents

Other manuals for NEFF S153ITX02G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEFF S153ITX02G and is the answer not in the manual?

NEFF S153ITX02G Specifications

General IconGeneral
Door colorNot applicable
Cord length1.75 m
Product sizeFull size (60 cm)
Inlet hose length1.65 m
Custom panel-readyYes
Outlet hose length1.9 m
Appliance placementFully built-in
Included number of shelves2
Cycle time270 min
Noise level50 dB
Delay start (max)9 h
Overflow protection-
Dishwashing programs60min 65°C, Auto 45-65°C, Chef 70°C, Eco 50°C, Favorite
Number of place settings12 place settings
Number of washing programs5
Child lockNo
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Water consumption per cycle10.5 L
Package weight32200 g
Weight and Dimensions IconWeight and Dimensions
Depth550 mm
Width598 mm
Height815 mm
Weight30100 g
Depth with door open1150 mm
Installation compartment width600 mm
Installation compartment height (max)875 mm

Related product manuals